Spray Foam – It’s What We Do
1000 Islands Spray Foam offers a professional spray foam service from the moment we quote, right through to clean-up and completion of your foam project. We understand our Canadian climates, and strive to bring efficiency and
comfort to our customers.
We are based in Brockville, Ontario, but serve clients in Brockville, Prescott, Gananoque, Smiths Falls, Kemptville, Perth, Cardinal, Iroquois, Carleton Place, Kingston, Ottawa, Arnprior, Renfrew, Napanee, and Cornwall (and all area’s
in between)!
RESIDENTIAL
1000 Islands Spray Foam can offer homeowners a wide range of spray polyurethane foam (SPF) services, from spraying wall cavities, rim joists, attics, under slab insulation (including certified Radon barriers), foundation walls, underground piping from wells and septic systems, swimming pools, hot tubs etc. The possibilities of where to apply spray foam are truly endless!
We have a few chemical manufacturers we currently work with (Grizzly Gold, Genyk and Soprema), due to their exceptional R-value per inch, and ultra-low global warming potential by using an HFO blowing agent in their 2lb closed-cell foam.
Contact us today and let us help you ‘Get Foamed!’
COMMERCIAL / INDUSTRIAL
Spray Polyurethane Foam (SPF) is not just for residential applications, it’s also perfect for many commercial and industrial applications. In addition to the areas outlined under the RESIDENTIAL section, commercial and industrial applications could include pipeline or storage tank insulation, soundproofing, and exterior building envelope spraying. Schools, office buildings, commercial warehouses, factories, storage units, hotels, shopping malls, restaurants etc. could all benefit from the use of spray foam.
There are almost endless applications for spray foam. Bring us your insulation requirement, and let us figure out how to get it done!
ROOFING
Most people dealing with buildings that have flat roofs, don’t think of spray foam when it comes time to re-do your roof! Compared to tar & gravel roofing, spray polyurethane foam (SPF) with a silicone barrier applied, gives you a complete air and moisture barrier on your roof. It is also typically cheaper than the costs to re-do a tar & gravel roof.
Another huge benefit is we can greatly reduce your buildings heat loss by adding additional R-value to your roof, through either 3lb exterior roofing foam, or a combination of 3lb closed-cell foam on the exterior, and 0.5lb open-cell foam applied on the interior.
Contact us for all your flat roof needs!
RADON BARRIER SYSTEMS
All new construction in Ontario requires builders to incorporate a Radon mitigation system, including a barrier to block any Radon gas from entering the home or structure.
1000 Islands Spray Foam offers customers a fully certified solution, to provide both under slab insulation and Radon protection. Our chemical supplier (Grizzly Gold) and our certification body (CUFCA), have a fully ULC lab certified solution for Radon protection. Our installers are fully certified in the installation of spray foam Radon barrier systems.
Installing in-floor radiant tubing? No problem, we can install that right on top of our barrier system. Contact us for your Radon barrier needs!
For more information on this solution, check out CUFCA’s brochure on this RADON solution by clicking HERE
Have A Need For Blown-In Insulation, or Blown-on Fireproofing, Thermal or Acoustic Insulation?
We Can Do That Too!
1000 Islands Spray Foam has expanded our product offerings to our clients, and we now offer Fireproofing, Thermal, and Acoustic blown-on services for residential, commercial or industrial clients. This is in addition to our ability
to do blown-in fiberglass insulation for attics and walls.
Using the latest in blowing technology, we have the ability to install a wide variety of fiber based products.
1000 Islands Spray Foam is an approved applicator for the
Cafco BlazeShield II blown-on cementous fireproofing product, as well as the
Soprema K13 thermal insulation, and
Soprema Sonaspray FC acoustic blown-on product.
FIREPROOFING
Over time, existing blown-on fireproofing can become brittle and start to decay or fall off the structures it once adhered to. This can possibly lead to your building or structure being compromised should a fire occur.
Here is a little video clip showing you just how easy fireproofing can fall off, once it’s degraded over time.
TRUST AN APPROVED APPLICATOR
As mentioned above, 1000 Islands Spray Foam is one of only a handful of approved applicators in Eastern Ontario for the Cafco BlazeShield II fireproofing product, as well as the Soprema K13 thermal insulation and Soprema Sonaspray FC acoustic blown-on insulation.
We work directly with our customers to understand their specific project requirements, before liaising with our technical support representatives to find out what we need to do, to achieve a proper installation of a given product.
Technical representatives regularly come to our job sites during the initial install, to provide us with product and project support.
DONE RIGHT, THE FIRST TIME!
Having the proper equipment to complete a job is in almost every case, crucial to the success of a product install. 1000 Islands Spray Foam is utilizing the latest in fiber blowing technology, to install both blown-in fiberglass insulation, as well as fireproofing, thermal and acoustic insulation.
The same level of professionalism and attention to detail you have come to expect from 1000 Islands Spray Foam for our spray foam offerings, is done on all our fiber based projects as well. Customer satisfaction and a job well done, are still our #1 business priority.
Contact us today for a free estimate, or to discuss your next fiber based project.
WE know how to GET IT DONE
Our Spray Robot in action
1000 Islands Spray Foam is fully equipped with all of the tools needed to make your new spray polyurethane foam roof a reality!
The Gold standard in spray polyurethane foam
GrizzlyGold can transform your home into a comfortable and energy-efficient living space!
Grizzly Gold, a Canadian made spray polyurethane foam (SPF), offering both 0.5lb open-cell and 2lb closed-cell SPF products that go beyond traditional batt insulation in terms of their versatility, thermal values and air sealing capabilities. 2lb spray foam also provides a vapor barrier.
Grizzly Gold’s 2lb closed-cell foam is formulated with an advanced HFO blowing agent, meaning this SPF has an ultra-low global warming potential (GWP) rating of 1. Compared to alternative spray foams in the market, this foam is 99.9% less harmful to the atmosphere.
GACO – NOW A PART OF FIRESTONE BUILDING PRODUCTS
Seamless insulation and waterproofing designed to withstand ponding water. Guaranteed!
GacoRoofFoam insulation, a 3lb spray polyurethane foam, combined with the GacoFlex Solvent-Free Silicone Roof Coating, provides a roofing system that rivals anything that tar and gravel could try to do. Their product is guaranteed to withstand ponding water on the roof, and because its spray foam, you can modify its thickness to achieve additional R-value in your buildings roofing system.
1000 Islands Spray Foam can offer a warranty of up to 25yrs on this system.